Tendercast
Check my match
All notices
Contracts FinderUK

Inclusive MUGA design, supply and install

Winchester City Council

View official noticeFind notices like this

Scope as published

In the coming months Winchester City Council expects to issue a tender for the design, supply and installation of an inclusive Multi-Use Games Area (MUGA) at St Matthews Field, Winchester SO22 5HY. The purpose of this Early Engagement Notice is to inform potential providers of the Council's requirements, gather market feedback on the proposed scope and approach, and to assist in the development of the specification. The expectation is that a virtual meeting will be hosted by the Council at 1000hrs on Wednesday 25 November 2026. If this opportunity is of interest, please complete the attached form and return by 1700hrs 23 November 2026.

Deadline
Not published
Published
6 Nov 2026(7 hours ago)
Contract value
Not published
Location
United Kingdom
Reference
ocds-b5fd17-cffbf6a0-6cd8-4543-a737-34ae564e3afc
First seen
31 minutes ago

Classifications

37535200Playground equipment45112723Landscaping work for playgrounds

Other open notices from this source

Contracts FinderRestricted procedure (above threshold)

Taxi and MPV (1-8 seats) Passenger Assistant - Taxi and MPV (1-8 seats) Passenger Assistant

Vehicle type: Saloon Passenger Assistant Required: Yes Proposed Taxi Route: From: TN38 8BQ To: BN26 6TX Tuesday, BN8 6HQ Thursday Frequency: Tuesday and Thursday only Daily School Time: 09:00 to 11:45 both days Comments for Operator: ASD, SpLD This opportunity has been distributed on SProc.net

East Sussex County Council
United Kingdom
10 Nov 2026(4d)
Contracts FinderCompetitive procedure with negotiation (above threshold)

M48 SEVERN CROSSING RESURFACING EXPRESSION OF INTEREST

• Application of the following mastic asphalt product: Permatrack Bridge Surfacing + 40% 4/10mm Agg (MA 10 10/20) with 6mm Pre-coated chippings 68PSV at a rate of spread of 6.0 to 7.5 kg/m2 • Application to achieve a mean thickness of an average of 35mm +/- 2mm locally • Surfacing to achieve the following standard: o Surface regularity taken on 75m lengths, the pavement surface shall be measured transversely for irregularities at 10m intervals by a 3m long straight-edge in accordance with BS8420 placed at right angles to the centre line of the road. The maximum allowable difference between the surface and the underside of the straight-edge, when placed parallel with, or at right angles to, the centre line of the road shall be 3mm. For each 75m lengths, maximum permitted number of surface irregularities shall be 9 and 1 for irregularity limits of 4mm and 7mm respectively. o Initial texture depth: 1.5mm (minimum) to 2.0mm (maximum) for average per 1,000m or complete carriageway lane where this is less than 1,000m. Initial texture depth: Average for a set of 10mm measurement shall be 1.2mm minimum. Interval and frequency of macrotexture measurements: 10 per 200m. Texture depth shall be measured by 10 individual measurements taken at approximately 5 m spacing along a diagonal line across the lane width. Initial surface macrotexture for bituminous surface courses shall be measured using the volumetric patch method described in BS EN 13036-1. Additional information: This is an expression of interest for planned works. All values expressed are estimated for budget purposes.

AMEY OW LIMITED
United Kingdom
£30.0m