France – Accident and health insurance services – Garanties complémentaires des frais de santé et de prévoyance
Complémentaire frais soins de santé
- Chambre de Commerce et d'Industrie Caen Normandie
- France
The full corpus, straight from the official feeds. Use this to check coverage — then set up a profile so you never have to read it again.
7,008 notices
Page 66 of 281
Complémentaire frais soins de santé
Louth County Council requires Technical Consultancy Services from a multi-disciplinary engineering led Consultancy team which will provide the Engineering and Appraisal services required to successfully deliver the project through the procurement, construction and closeout phases. Louth County Council propose to carry out the procurement, construction and implementation phases of the Port Access Northern Cross Route (PANCR) – Phase 3. The Port Access Northern Cross Route (PANCR) – Phase 3 comprises the construction of new carriageway (approx. 1.08km long), construction or rail underbridge c10.5m in width and c20.0m in length and all ancillary works.
Folgende Leistungen werden vergeben: 1. Objektplanung Gebäude und Innenräume nach § 34 HOAI 2021 (Honorarzone III): LPH 1-9 2. Objektplanung Freianlagen nach § 39 HOAI 2021 (Honorarzone III): LPH 1-9 3. Objektplanung Verkehrsanlagen nach § 47 HOAI 2021 (Honorarzone II): LPH 1-9 4. Fachplanung Tragwerksplanung nach § 46 HOAI: LPH 1-9 5. Fachplanung Technische Ausrüstung nach § 55 HOAI: LPH 1-9 6. Planung der Barrierefreiheit nach AHO-Heft Nr. 40: LPH 1-9 7. Leistungen für den bauordnungsrechtlichen Brandschutz nach AHO-Heft Nr. 17: LPH 1-8 8. Beratungsleistungen Bauphysik nach Anlage 1.2 HOAI 2021: LPH 1-9 9. Beratungsleistungen Geotechnik nach Anlage 1.3.3 der HOAI 2021 10. Vermessungsleistungen nach Anlage 1.4.4 und 1.4.7 der HOAI 2021 11. Leistungen nach der Baustellenverordnung nach AHO-Heft Nr. 15 Die Vergabe der Leistungen ist in Form eines Stufenvertrags vorgesehen (Stufe 1: LPH 1-4; Stufe 2: LPH 5-9).
Upphandling av kostymer
Obiectul contractului: Autoritatea contractantă este interesată de achiziționarea unui Buldoexcavator pe pneuri cu accesorii în condițiile și cu respectarea specificațiilor tehnice descrise în caietul de sarcini CERINŢE, SPECIFICAŢII TEHNICE MINIMALE: Lotul I – Buldoexcavator pe pneuri cu accesorii, tracțiune integrală (4x4). Dimensiuni şi mase a. lungime max. 5.800 mm; b. lăţime max. 2.500mm; c. înălțime peste braţul de excavare max. 3.700 mm; d. înălțime peste cabină max. 3.200 mm; e. garda la sol min. 350 mm; f. raza minimă de întoarcere max. 3.600 mm; g. masa totală maximă autorizată max. 9000 kg. Motor a. capacitate cilindrică 4000 – 5000 cmc; b. nr. cilindrii 4; c. putere maximă min. 100 CP; d. cuplu maxim min. 480 Nm; e. viteză maximă min. 35 km/h; f. emisii poluante Respectarea normelor de poluare in vigoare STAGE V; g. răcire cu lichid, presurizată cu radiator sau aer; Punţi a. încărcare dinamică punte faţă min. 8.000 kg; b. încărcare dinamică punte spate min. 12.000 kg. Performanţe încărcător a. forţa de rupere la cupă min. 6.400 kgf; b. înălţimea maximă de ridicare min. 3.300 mm; Performanţe excavator a. forţa de rupere la cupă min 6.100 kgf; b. adâncime maximă de săpare min. 5.700 mm; c. înălţimea maximă de descărcare min. 4.600 mm. Transmisie a. cutie de viteze - Tip AUTOSHIFT - proiectata si construita special pentru buldoexcavatoare, cu sincronizarea schimbărilor de viteză în toate treptele - comandă electrică pentru selectarea direcţiei de mers b. trepte de viteză fată/spate Minim 6/4 c. tracțiune comandă electrica pentru selectarea punţilor motoare 4x4, 2x4 Direcţie a. hidrostatică pe puntea faţă; b. cu supapă de prioritizare în caz de urgenţă; c. cilindri de direcţie să fie aşezaţi în spatele punţii pentru o protecţie sporită. Frânare/siguranţă în exploatare a. cu discuri imersate în ulei, acţionare progresivă şi proporţională; b. acţionare hidraulică; c. frână de parcare; Instalaţia electrică a. tensiune de alimentare 12 V; b. instalație iluminare cu reglaj din interior; Instalaţie de incălzire şi ventilaţie a. instalație de aer condiționat; b. instalație de încălzire; c. prevăzut cu filtru de praf/ aer. Sistem hidraulic a. pompă hidraulica cu debit variabil şi pistoane axiale, echipată cu sistem automat ce reglează debitul de ulei în funcţie de sarcina de lucru; b. debit hidraulic total min. 165 l/minut c. presiune maximă max. 255 bar Caroserie a. cabină (protejată la răsturnare şi la căderea obiectelor) închisă, cu ventilație, încălzire și AC; b. protecţie anticoroziune. Culoare a. vopsea din paleta de culori a furnizorului. Anvelope a. dimensiuni: conform producătorului; Dotări/ accesorii/ echipamente minimale a. Sistem automat care verifica pe parcursul zilei de lucru, urmatorii parametrii: nivel ulei motor-lichid racire-lichid parbriz-combustibil, stare filtre motorina, grad incarcare filtre de aer, presiune ulei motor, temperatura functionare motor; b. Sistem care decuplează automat puntea fata, la depasirea unei viteze de deplasare prestabilita; c. Sistem cu activare automata dupa depasirea vitezei de deplasare presetate-amortizeaza oscilatiile cupei de incarcare in timpul deplasarii pentru o mai buna retentie a materialului, cresterea vitezei de lucru, reducerea uzurii, imbunatatirea confortului; d. Cupa incarcator multifunctionala, cu dinti si furci, capacitate minim 1,0 mc, lățime de lucru minim 1.800 mm; e. Tocator vegetatie latime minim 1.000 mm, diametru taiere vegetatie de minim 60 mm; f. Motor actionare burghiu foreza, montaj pe brat excavare, cuplu minim 5.000 Nm + 2 bucăți burghie standard de foraj cu lungime minim 1.000 mm și diametru de 230 mm respectiv 300 mm; g. Picon greutate operațională minim 320 Kg, diametru șpiț minim 70 mm, energia impact minim 1300 J; h. Burghiu foreză HEAVY DUTY cu lungime minim 1.000 mm și diametrul de 230 mm; i. Incălzitor 240V; j. Protectie rezervor combustibil; k. Parbriz încălzit; l. Lama buldozer minim 2500 mm, minim 280 kg; m. Dispozitiv pentru taiat creng…
PAKIET 1
Mittelspannung
Lote 1: Suministro de 2 vehículos autoescala automática
Predmet javnega naročila je dobava, montaža in vzdrževanje sistema elektronskega in mehanskega zaklepanja, z evidenco dostopa na objektih oziroma lokacijah Skupine JAVNI HOLDING Ljubljana, d.o.o., v obsegu oziroma količini, ki ga naročnik vnaprej ne more natančno opredeliti.
Auftragsgegenstand sind die Gewerke Sanitär, Heizung, Lüftung, Kälte und Laborgasversorgung für den Neubau des Landeskriminalamts Sachsen-Anhalt. Die Ausführung erfolgt unter Berücksichtigung der erhöhten Anforderungen an einen sicherheitsrelevanten Behörden-standort sowie unter ständiger BIM-gestützter Projektkoordination. Detaillierte Angaben zum Projekt und dem voraussichtlichem Leistungsumfang sind in Anlage "Umfang der Leistung" beschrieben. • Eigene Baustelleneinrichtung, • Werkstatt- und Montageplanung, • Sanitärtechnischen Anlagen einschließlich Trinkwasser-, Schmutz- und Regenwasseranlagen, Hebe- und Druckerhöhungsanlagen sowie Wasseraufbereitungssysteme, • Heizungs- und Kälteanlagen einschließlich Wärme- und Kälteverteilung, Wärmeerzeugung mittels Geothermie sowie Pumpen- und Regelungstechnik, • Raumlufttechnische Anlagen für Büro-, Labor-, Technik- und Sonderbereiche, Laborabluft- und Sonderlüftungssysteme, • Medien- und Laborgasversorgungsanlagen einschließlich Druckluftversorgung, Gaszentralen, Flaschenlager, Umschaltanlagen und Rohrleitungsnetze, • Eine detaillierte Leistungsbeschreibung wird im Zuge des Vergabeverfahrens zur Verfügung gestellt.
Lot H : Tripodes et Serpentins Sud-Est - Réhabilitation
1 Szczegółowy opis przedmiotu zamówienia stanowi - Załącznik nr 2 do SWZ. 2. Zamówienie jest dofinansowane z projektu nr FESL.06.03-IZ.01-0C9C/24 pt. „Zdobądź zawód i kwalifikacje - transformacja CKZiU ul. Kilińskiego 25” finansowanego ze środków FESL.06.00-Fundusze Europejskie dla edukacji dla Działania: FESL.06.03-Kształcenie zawodowe z Fundusze Europejskie dla Śląskiego 2021-2027. 3. Okres gwarancji dla części 1 zamówienia wynosi: 36 miesięcy
Předmětem plnění je dodávka a implementace informačního systému kategorie ERP pro řízení standardních procesů, infrastrukturních aplikací a specifické agendy společnosti (zadavatele) v segmentu HR blíže definované v příloze č 3 ZD a dále pak smluvní dokumentací, která je definována v příloze č 2 ZD
Przedmiotem zamówienia jest dostawa jednej sztuki fabrycznie nowego agregatu prądotwórczego z silnikiem wysokoprężnym o mocy znamionowej minimum 100 kVA / 80 kW, przeznaczonego do awaryjnego zasilania obiektów, zabudowanego w pełnym, odpowiednio zaadaptowanym i izolowanym kontenerze morskim typu ISO o długości 10 ft lub 20 ft, wraz z kompletnym wyposażeniem, automatyką, rozbudowanym układem paliwowym oraz układem SZR (Samoczynne Załączanie Rezerwy).
Design, administration and analysis of staff engagement surveys, benchmark results where applicable, and preparation of professional reports and recommendations, with the objective of gaining insight into employee engagement, organisational culture and workplace experience.
SECTEUR NORD CARAÎBE Case Pilote, Bellefontaine, Morne Vert, Saint Pierre, Fonds Saint-Denis, Prêcheur, Morne Rouge, Fort de France, Lamentin, Schoelcher, Saint-Joseph.
Les prestations sont réglées par des prix unitaires et forfaitaires. Les spécifications techniques et les modalités d'exécution de la mission de diagnostic structurel portent sur la charpente et l'ossature de 514 logements individuels issus du programme « VIVADES » (période de construction 2000-2005), répartis sur le patrimoine de Pas-de-Calais Habitat. À la suite de désordres constatés et d'expertises préliminaires, une vulnérabilité structurelle a été identifiée sur certains pavillons à ossature métallique légère et charpente bois. Les désordres observés comprennent des déformations de charpente, des risques de flambement/déversement d'éléments d'ossature, ainsi que d'éventuelles altérations consécutives à des interventions ultérieures (notamment découpes de sections lors de travaux d'isolation par insufflation). La mission vise à établir un état des lieux exhaustif, pavillon par pavillon, afin de hiérarchiser les niveaux de risque, d'identifier les modes constructifs (structure métallique vs maçonnerie/parpaings) et de préconiser les actions conservatoires ou réparatrices adaptées, et leurs délais associés
1.Przedmiot zamówienia jest świadczenie usługi zaprojektowania, wykonania, konfiguracji, wdrożenia i uruchomienia produkcyjnego systemu informatycznego dla Regionalnego Centrum Medycyny Cyfrowej NIGRiR wraz z usługami integracji, dostawą oprogramowania niezbędnego do funkcjonowania systemu, przeszkolenia użytkowników i utrzymania systemu. Szczegółowy opis przedmiotu zamówienia (OPZ) wskazano w Załączniku nr 1 do SWZ Zamawiający wymaga, aby na przedmiot zamówienia została udzielona gwarancja na okres 36 miesięcy liczonych od dnia podpisania protokołu odbioru. 2.Szczegółowy opis przedmiotu zamówienia zawierają SWZ wraz z załącznikami, w szczególności z OPZ (parametry techniczne) i PPU. Zamawiający wymaga aby wykonawca wskazał, czy usługa i dostarczane oprogramowanie mają charakter usługi ICT lub produktu ICT - poprzez złożenie oświadczenia oraz wykazu usług lub produktów ICT.
Anskaffelse av skolebøker, faglitteratur og digitale læremidler for Lørenskog kommune
Prestación de los servicios necesarios para la planificación, organización y ejecución del servicio de catering para las Escuelas Infantiles gestionadas por la Fundación Municipal de Escuelas Infantiles de Santa Lucía, S.A.
S.U.A. PER A.S.P. CIVICA ASSISTENZA TOLENTINO. GARA EUROPEA A PROCEDURA APERTA ACCELERATA. APPALTO PER LAFFIDAMENTO DELLA GESTIONE DEI SERVIZI SOCIO-ASSISTENZIALI, AUSILIARI E ALBERGHIERI IN FAVORE DEGLI OSPITI DELLA STRUTTURA RESIDENZIALE DELL'ASP CIVICA ASSISTENZA TOLENTINO.
Contrat d'exploitation et de maintenance des installations collectives de chauffage, d'eau chaude sanitaire, de ventilation, de traitement de l'air et de climatisation
Die Medizinische Universität Wien (MedUni Wien) errichtet am Standort Allgemeines Krankenhaus Wien das Center for Precision Medicine. In dem Forschungsgebäude wird an einer raschen, präzisen und personalisierten Therapie auf Basis von individuellen Genanalysen geforscht und an der zukunftsweisenden Nutzung von maßgeschneiderten Therapien unter Berücksichtigung modernster Technologien gearbeitet. Vor diesem Hintergrund soll im Rahmen des gegenständlichen Vergabeverfahrens im Wesentlichen die Lieferung, Montage/Installation und Inbetriebnahme von einem Gewebezerkleinerer zur Vergabe gelangen. Es wird darauf hingewiesen, dass das Leistungsverzeichnis ausschließlich elektronisch direkt auf der Beschaffungsplattform auszufüllen ist.
As part of the overall PCIM project, the contractor will focus on 2 work packages - Work Package 1 (Output 2): Support to Cameroon"s National Research and Innovation System (SNRI) and coordination/harmonization of geographic data across ministries to provide coherent land-use and deforestation driver information. - Work Package 2 (Output 3): Preparation of the next CAFI-Cameroon phase via a project pipeline. Work Package 1 (Output 2) Activity 2.1.3: Support to a National Research and Innovation System (SNRI) - Purpose: Establish and develop a Cameroonian SNRI, supporting the National Strategy SND30, strengthen institutional conditions and the uptake of research and innovation. - Contractor tasks: close cooperation and coordination with the Ministry of Economy, Planning and Regional Development (MINEPAT) and the Ministry of Scientific Research and Innovation (MINRESI); Conduct a situational analysis/diagnosis of the SNRI; Develop an extended SNRI concept (actors, methods, processes, roles/mandates); Operationalize a permanent consultation framework (e.g., regulatory texts, documentation research); Identify innovative R&D projects (through calls for proposals/incubators) in concertation with GIZ and partners for subsequent financing; Develop an international research partnership strategy and organize a study trip for selected partners.; Develop a peatland conservation strategy. Activity 2.1.4: System for Digital and Satellite Mapping - Purpose: Support MINEPAT and sector ministries (e.g., Ministry of Agriculture MINADER, Ministry of Forests and Fauna MINFOF) and the National Observatory on Climate Change (ONACC) to produce and digitize real-time maps on forest cover/deforestation, forest resource use (mining/agriculture), and agro-sylvo-pastoral land; move toward a centralized, cross-ministerial system. - Contractor tasks: Map all actors currently producing cartographic material (beyond the National Institute of Cartography); Support the National Institute of Cartography in compiling, completing, and harmonizing cartographic datasets/parameters; Support MINFOF to improve SIGIF2 by: (i) operationalizing all modules incl. satellite imagery, (ii) establishing annual procedures to evaluate the traceability function, activating the national monitoring committee (APV FLEGT), and publishing evaluation and action plan on APV and MINFOF websites, (iii) interconnecting SIGIF2 with customs and tax systems and setting a roadmap to improve forestry taxation (MINFOF/MINFI); Support ONACC in climate monitoring reports (e.g., Forest Cover Loss Atlas 2000-2017; updated climate risk monitoring) to inform the National Adaptation Plan. Work Package 2 (Output 3) Activity 3.1.2: Feasibility Studies - Purpose: Provide robust decision bases for the project pipeline. - Deliverables: 15 Preliminary Economic Assessments (PEA), 15 pre-feasibility studies, 15 feasibility studies, plus capacity building for the Project Steering Unit (UGP). - Approach: Early expert involvement, stakeholder feedback (sector ministries and decentralized authorities), analysis of technical, economic, environmental, and climate aspects; results guide project design and management. Activity 3.1.3: Development of ProDocs - Based on portfolio design and studies: o Draft and submit ToR for Calls for Expressions of Interest (CEI) for implementing agencies to MINEPAT. o Coordinate validation of project outlines with UGP and CAFI Secretariat. o Note: MINEPAT selects/engages agencies; ProDocs and related workshops are produced by the selected agencies under MINEPAT supervision. o Provide technical support to agencies developing ProDocs; support MINEPAT in mobilizing finance (public/private, national/international, co financing, credit). o Target sectors: industry/energy, agro industry (priority crops, deforestation drivers), forest/wood, mines metallurgy steel (green mine), transport (market access in rural areas). Ensure alignment with NDS30, sector strategies, and deforestation free, c…
Die Universität Siegen vergibt mit diesem Verfahren die Sicherheitsdienstleistungen zur Bewachung des gesamten Geländes und aller Gebäude der Universität Siegen und Sicherheitsdienstleistungen über die Erbringung von Sonderdiensten, die nicht der täglichen Bewachung des gesamten Geländes und aller Gebäude der Universität Siegen dienen, sondern anlässlich besonderer Umstände erforderlich werden. Die Bewachung dient der Sicherung der Gebäude, Einrichtungen und Außenanlagen der Universität Siegen gegen Einbruch, Diebstahl, Vandalismus und Brandgefahren. Außerdem soll sie der Aufrechterhaltung eines ungestörten Betriebsablaufs dienen. Die Sonderdienste unterstützen die regulären Bewachungsleistungen und dienen damit ebenso wie diese der Aufrechterhaltung eines ungestörten Betriebsablaufs dienen.